Fixed Prices

GENERAL TERMS

• All digital equipment can be set-up as part of the job, inclusive of labour

• All prices listed are an estimated guide, and are subject to a site survey, and confirmation on the job

• All prices are inclusive of labour

• All prices are subject to VAT at 20% - Complete Digital Installations VAT No: 470 5613 00

• All signals are tested with a Digital Spectrum Analyser

• 12 month guarantee with all installations

Call Out & Fix There and Then!

• Typically, internal diagnostics and quicker fixes, equipment tuning, hardware set-up, etc,  1/2hr - 1hr labour approx, minor or no parts fitted £60 + vat

• General labour is priced at £55 + vat p/h

TV Aerial

(UHF, DTT, DVB-t1 + 2, COFDM, Freeview, Freeview HD, etc...)

• Re-wire back to an existing Aerial £80 + vat (providing Aerial is watertight & serviceable)

• Masthead amplifier & PSU to improve weak signals, fitted to exisiting Aerial and cable £120 + vat (providing Aerial is watertight & serviceable)

• Re-Lash damaged or broken lashing wire (Lashing kit = steel wire strap that secures the chimney bracket) £80 + vat

• Complete Aerial system , old aerial(s) removed, new lashing-kit/bracketing (galvanised), mast, wideband aerial, downlead, test & tune £275 + vat

• With masthead amplifier & power supply (if off-air signals are too weak to decode via a high gain aerial alone) £325 + vat

Satellite Dish (Wall Mounted)

(Astra 28, Sky, Freesat, QPSK, DVB-s, etc...)    

• Dish re-alignment £80 + vat

• Replacement LNB, including diagnostics £80-100 + vat Depending on Quad, Octo LNB, or wideband (SkyQ)

• 45cm mini-dish, quad LNB (4 outputs) for use with Sky or Freesat, wall mounted up to 2 storey height, twin downlead as standard £250 + vat

Sky TV - If Sky have turned down your install (and they may do for various reasons!), I can supply and fit your dish, bracketry & cabling, Sky can then be notified to re-arrange an engineer to visit and fit your Sky box, and activate the viewing card, this includes the new SkyQ system which I can also deal with.

Satellite Dish (Roof / Chimney Mounted)

(As above, but where the dish cannot be wall mounted)

• Roof ladders are used & extra bracketing, chimney mounting, up & over rigs (if the dish position is the opposite side of the house to the receiver due to signal direction), & twinsat downleads for Sky Plus or Freesat PVR twin tuners etc, test & tune £250 - 350 + vat approx

Fixed Satellite Dish, European Channels / Various Languages

(Astra 19, Hotbird 13, Eutelsat, Thor, etc..)

• Satellite dish & bracketing (Please note different satellites and the channels they broadcast do have varied dish size requirements). Common sizes within the UK are 60cm, 80cm, or 1m. Universal LNB, & downlead  from £250 + vat - for a basic install

Please Note: A Universal Satellite Receiver will be required to decode the satellite signals, and these can vary in price with lots of choice available, so a total package price is subject to individual needs & requirements, please call for details

Individual Extra Outlet Points

(One off visit to fit an additional coaxial cable to a room of your choice)

• TV Aerial or Satellite extra points, if they are installed individually as a one-off install, cabling, wall grommets, connections, test & tune £80 + vat

• Wall mounted sockets £25 + vat depending on style/finish to match interior decor etc (white plastic is standard)

• If splitters/masthead amplifiers/quad LNB's (Satellite reception), etc, are required to correctly gain a balanced signal to all TV points, including test & tune £80 + vat

Multi-Room - Satellite or TV Aerial

(If you are having a number of points installed during one visit, then package prices are as follows):

Internal wall mounted sockets are recommended for a tidy & neat finish to your system, these are priced at £25 + vat per socket depending on finish/style to match your interior decor etc, please ask for details

TV Aerial (to include a complete new Aerial array)

• With non-powered splitter (passive) externally distributed from the aerial,

2 points £355 + vat
3 points £435 + vat
4 points £515 + vat 1/2 day or 4 hrs labour approx

• As above but with powered Masthead Amplifier & power supply (if off-air signals are too weak),

2 points £405 + vat
3 points £485 + vat
4 points £565 + vat 1/2 day or 4hrs labour approx

• An additional £40 + vat to the package price if a 10/12ft mast with heavy duty brackets are required to gain peak reception

Satellite (to include the fitting of a new dish, Lnb, & cabling)

2 points £280 + vat
3 points £360 + vat
4 points £440 + vat 1/2 day or 4hrs labour approx 

Please Note:   Freesat or Freeview Receivers can be supplied & fitted if required, please ask for details  

TV Mounting

*** Please see the  PORTFOLIO  page for pictures of previous installations ***

• Small flat screens from £150 + vat inc bracket 

• Medium flat screens from £250 + vat inc bracket

• Large flat screen from £350 + vat inc bracket

• Got your own mount but need it installing? 1-2 hrs labour, wall fixings, any misc parts £80-150 + vat approx subject to installation requirements

• Note:  Wall stud locator & mains cable detector used on timber frame wall or non load bearing walls to identify joists/power cables etc 

• Cabling containment or decorative coloured trunking can be supplied and fitted to finish off a wall mounted Tv installation 

• An electrician is available for any hardwired power & additional sockets, if you dont have your own contacts. 

• A complete selection of Scart, HDMI, & Audio, cables & accessories are available to choose from, these are priced to individual requirements

Smart TV

*** CDI can offer installation / set-up of your Smart TV receiving equipment ***

• Ethernet points from your Router to:  Smart Tv / Bt Vision / Freesat PVR,  etc...

• Prices start at £60 + vat p/h, and will include a full demonstration of your equipment

Note:  All you need is a Broadband connection & Router, or the plan to have these in place from your chosen broadband provider

Wi-Fi

Having problems with Wi-Fi blackspots around the house?   Tried powerline adaptors, WIFI extenders, and it still isn't stable?
 

• I can install Wi-Fi access points. An installation would typically require:

  • • Cat 6 cable to the loft space from the broadband router

    • Network data switch (if multiple access points are required)
      
      

• "Ubiquiti" Wi-Fi Access Point:  the device is around the size of a typical circular smoke detector) 

  • • The devices are 'line powered' which mean they do not require unsightly mains power sockets next to them,  leaving a tidy neat install. 

    • Generally they will be installed in the loft space, and be directed downwards to flood signals throughout the house. 

    • If the house has a large footprint, multiple devices can be fitted.

    • Long & short range devices are available

    • WiFi 6 & Hybrid (both WiFi & Ethernet) devices are available

CCTV

• High definition systems, from a single camera to multiple are available for installation. 

• Various specifications to choose from, all systems are viewable via an app on smart phones & tablets etc. 

• All jobs surveyed for quotation, to establish position of cameras & hard-drive in the home, and best network connection. 

• Once fitted, all systems will be demonstrated.